在线超碰av,天天操天天摸天天射,免费的爱爱视频,情侣av在线,一级片中文字幕,2022国产毛片大全,精品亚洲大全

三相短路
兩相短路
哪里：
•Sk
是故障點處的短路視在功率；
•Ur
是額定電壓。
確定短路視在功率Sk
，網絡的所有元素
應考慮以下因素：
•產生短路電流的元件：
網絡、發電機、電機；
•限制短路電流值的元件：
導線和變壓器。
短路電流的計算程序包括
以下步驟：
1、變壓器不同元件的短路功率計算
安裝
2、計算故障點短路功率；
3、短路電流的計算。
6.3.1變壓器不同元件的短路功率計算
安裝
短路視在功率Sk
應為所有部件確定
這是安裝的一部分：
網絡
電網被認為包括該點上游的一切
能源供應。
可以消除短路電流

Three-phase short-circuit Two-phase short-circuit where: • Sk is the short-circuit apparent power seen at the point of the fault; • Ur is the rated voltage. To determine the short-circuit apparent power Sk , all the elements of the network shall be taken into account, which may be: • elements which contribute to the short-circuit current: network, generators, motors; • elements which limit the value of the short-circuit current: conductors and transformers. The procedure for the calculation of the short-circuit current involves the following steps: 1. calculation of the short-circuit power for the different elements of the installation; 2. calculation of the short-circuit power at the fault point; 3. calculation of the short-circuit current. 6.3.1 Calculation of the short-circuit power for the different elements of the installation The short-circuit apparent power Sk shall be determined for all the components which are part of the installation: Network An electrical network is considered to include everything upstream of the point of energy supply. The short-circuit current can be de