在线超碰av,天天操天天摸天天射,免费的爱爱视频,情侣av在线,一级片中文字幕,2022国产毛片大全,精品亚洲大全

DKC02.3-040-7FW
所有數(shù)字定時連接均參考DGND。此參考是
如圖4-4所示，該圖顯示了如何連接外部PFI0
電源和外部PFI2電源連接至兩個6711/6713設備PFI引腳。
圖4-4：。定時輸入/輸出連接
可編程功能輸入連接
共有七個內(nèi)部定時信號，您可以從外部
通過PFI引腳進行控制。每個信號的源是
需要外部控制時，可從任何PFI中選擇軟件。
這種靈活的路由方案減少了更改物理
連接至設備輸入/輸出連接器，以滿足不同應用的需要
備用接線。
您可以單獨啟用六個PFI引腳以輸出特定的內(nèi)部
正時信號。例如，如果需要更新*信號作為輸出
在輸入/輸出連接器上，軟件可以打開
PFI5/更新*引腳。當PFI信號
配置為輸出。

All digital timing connections are referenced to DGND. This reference is demonstrated in Figure 4-4, which shows how to connect an external PFI0 source and an external PFI2 source to two 6711/6713 device PFI pins. Figure 4-4. Timing I/O Connections Programmable Function Input Connections There are a total of seven internal timing signals that you can externally control from the PFI pins. The source for each of these signals is software-selectable from any of the PFIs when you want external control. This flexible routing scheme reduces the need to change the physical wiring to the device I/O connector for different applications requiring alternative wiring. You can individually enable six of the PFI pins to output a specific internal timing signal. For example, if you need the UPDATE* signal as an output on the I/O connector, software can turn on the output driver for the PFI5/UPDATE* pin. Be careful not to drive a PFI signal externally when it is configured as an output.