在线超碰av,天天操天天摸天天射,免费的爱爱视频,情侣av在线,一级片中文字幕,2022国产毛片大全,精品亚洲大全

140CRA93100
寫入在來自不同記錄道的數據之間執行的計算結果。
將記錄道設置為計算模式時，從不同
記錄道、規格化顯示、每指定帶寬的功率顯示或曲線擬合顯示
根據設置的計算模式執行。請注意，計算模式
只能為記錄道C、F和G設置。此外，可用的計算因記錄道而異
查出有關更多信息，請參閱第6章。
標準化顯示功能<<操作程序見第6.6節>>
此函數是跟蹤計算模式之一。它規范化并顯示
跟蹤數據。
使用規格化顯示，執行規格化，波形顯示為
如果子刻度為線性，則波形峰值設置為1；如果子刻度為線性，則波形峰值設置為0 dB
日志。一條記錄道可以標準化，記錄道A、B或C。如果兩條記錄道都選擇用于
計算設置為“空白”，則子刻度顯示在
屏幕否則將顯示在右側。將顯示計算結果
在小比例尺中。數據區側面的跟蹤顯示變?yōu)?ldquo;NORM@”。
曲線擬合<<操作程序見第6.7節>>
對指定的跟蹤波形進行近似。結果寫入跟蹤G。
計算應用于從峰值到閾值的數據。閾值
值設置在0到99 dB的范圍內（步長為1）。跟蹤顯示在
數據區更改為“CRV FIT@”
峰值曲線擬合<<操作程序見第6.7節>>
對指定的跟蹤波形進行近似。結果寫入跟蹤G。
計算應用于閾值或閾值以上的模式峰值。閾值
值設置在0到99 dB的范圍內（步長為1）。跟蹤顯示在
數據區更改為“PKCVFIT@”。

Writes the results of calculations performed between data from different traces. When a trace is set to CALCULATE mode, subtraction between data from different traces, normalized display, power display per specified bandwidth, or curve-fit display is performed according to the set CALCULATE mode. Note that CALCULATE mode can only be set for traces C, F, and G. Also, the available calculations vary from trace to trace. For more information, see chapter 6. Normalized Display Function > This function is one of the trace CALCULATE modes. It normalizes and displays the trace data. With normalized display, normalization is performed and the waveform is displayed with the waveform peak set to 1 if the sub-scale is linear, or set to 0 dB if the sub-scale is LOG. One trace can be normalized, either trace A, B, or C. If both traces selected for calculation are set to “BLANK”, then the sub-scale is displayed on the left side of the screen. Otherwise it is displayed on the right side. The calculation results are displayed in the sub-scale. The trace display at the side of the data area changes to “NORM @”. Curve Fit > Makes an approximation of the specified trace waveform. The result is written to TRACE G. Calculations are applied to data from the peak to the threshold value. The threshold value is set in the range of 0 to 99 dB (steps of 1). The trace display at the side of the data area changes to “CRV FIT @.” Peak Curve Fit > Makes an approximation of the specified trace waveform. The result is written to TRACE G. Calculations are applied to mode peaks at or above the threshold value. The threshold value is set in the range of 0 to 99 dB (steps of 1). The trace display at the side of the data area changes to “PKCVFIT @”.