在线超碰av,天天操天天摸天天射,免费的爱爱视频,情侣av在线,一级片中文字幕,2022国产毛片大全,精品亚洲大全

PXI-7853R
本章介紹您的PCI/PXI-6711/6713設備，列出您的
需要開始，描述可選軟件和可選設備，
并解釋了如何打開6711/6713設備的包裝。
關于6711/6713設備
感謝您購買National Instruments 6711/6713設備。你的
6711/6713設備是一種完全即插即用、模擬輸出、數字和
PXI/PCI/CompactPCI的定時輸入/輸出設備。6711/6713設備
每個通道具有12位數模轉換器（DAC），具有
電壓輸出的更新速率高達毫秒/秒/通道，八行
TTL兼容數字輸入/輸出，兩個24位計數器/定時器用于定時輸入/輸出。
6711設備具有四個電壓輸出通道，而6713
該設備具有八個電壓輸出通道。因為6711/6713
該設備沒有DIP開關、跳線或電位計，很容易
軟件配置和校準。
6711/6713設備是一種完全無開關、無跳線的數據傳輸設備
PXI/PCI/CompactPCI的采集（DAQ）設備。此功能是
由國家儀器公司的MITE總線接口芯片實現
將設備連接到PCI I/O總線。MITE實現PCI
本地總線規范，以便中斷和基本內存地址
是否配置了所有軟件。
6711/6713設備使用National Instruments DAQ-STC系統
用于時間相關功能的定時控制器。DAQ-STC包括
控制模擬輸入、模擬輸出和
通用計數器/計時器功能。這些組共包括
七個24位和三個16位計數器，大定時分辨率為
50納秒。DAQ-STC的模擬輸入部分未被
6711/6713.
通常，對于其他DAQ設備，您無法輕松同步多個
測量功能適用于公共觸發器或計時事件。這個
PCI-6711/6713設備具有實時系統集成（RTSI）總線
解決此問題。RTSI總線由我們的RTSI總線接口和
帶狀電纜，用于在多個功能之間路由定時和觸發信號
一章導言
PCI/PXI-6711/6713用戶手冊1-2©美國國家儀器公司
在計算機中多達五個DAQ設備上。如果您正在使用
PXI-6711/6713在PXI機箱中，RTSI線路，稱為PXI觸發總線，
是背板的一部分，因此不需要RTSI電纜
PXI上的系統觸發和定時。
6711/6713裝置的詳細規格見附錄A，
規范。

This chapter describes your PCI/PXI-6711/6713 device, lists what you need to get started, describes the optional software and optional equipment, and explains how to unpack your 6711/6713 device. About the 6711/6713 Devices Thank you for buying a National Instruments 6711/6713 device. Your 6711/6713 device is a completely Plug and Play, analog output, digital, and timing I/O device for PXI/PCI/CompactPCI. The 6711/6713 device features a 12-bit digital-to-analog converter (DAC) per channel with update rates up to Ms/S/channel for voltage outputs, eight lines of TTL-compatible digital I/O, and two 24-bit counter/timers for timing I/O. The 6711 device features four voltage output channels, while the 6713 device features eight voltage output channels. Because the 6711/6713 device has no DIP switches, jumpers, or potentiometers, it is easily software-configured and calibrated. The 6711/6713 device is a completely switchless and jumperless data acquisition (DAQ) device for the PXI/PCI/CompactPCI. This feature is made possible by the National Instruments MITE bus interface chip that connects the device to the PCI I/O bus. The MITE implements the PCI Local Bus Specification so that the interrupts and base memory addresses are all software configured. The 6711/6713 device uses the National Instruments DAQ-STC system timing controller for time-related functions. The DAQ-STC consists of three timing groups that control analog input, analog output, and general-purpose counter/timer functions. These groups include a total of seven 24-bit and three 16-bit counters and a maximum timing resolution of 50 ns. The analog input section of the DAQ-STC is unused by the 6711/6713. Often with other DAQ devices, you cannot easily synchronize several measurement functions to a common trigger or timing event. The PCI-6711/6713 device has the Real-Time System Integration (RTSI) bus to solve this problem. The RTSI bus consists of our RTSI bus interface and a ribbon cable to route timing and trigger signals between several functions Chapter 1 Introduction PCI/PXI-6711/6713 User Manual 1-2 © National Instruments Corporation on as many as five DAQ devices in your computer. If you are using the PXI-6711/6713 in a PXI chassis, RTSI lines, known as the PXI trigger bus, are part of the backplane, therefore you do not need the RTSI cable for system triggering and timing on the PXI. Detailed specifications of the 6711/6713 device are in Appendix A, Specifications.