在线超碰av,天天操天天摸天天射,免费的爱爱视频,情侣av在线,一级片中文字幕,2022国产毛片大全,精品亚洲大全

VMICPCI-7611-465
BIOS設置菜單允許用戶配置一些CPU設置、IDE總線、SCSI設備、其他外部設備和內部驅動器。從ezPORT設置屏幕中選擇Advanced（）選項卡，進入Advanced BIOS設置屏幕。您可以選擇屏幕左側框架中的項目，如SuperIO Configuration，以轉到該項目的子菜單。您可以使用按鍵突出顯示BIOS設置選項。BIOS設置屏幕的示例如下所示。注意：此屏幕中的更改可能導致系統故障。如果更改后發現問題，請重新啟動系統并訪問BIOS。從退出菜單中選擇“加載故障保護默認值”，然后重新啟動系統。如果系統故障導致無法訪問BIOS屏幕，請參閱章了解清除CMOS的說明。002.53（C）版權所有1985-2002，American Megatrends，股份有限公司.注：您的系統上可能沒有顯示的選項。BIOS SETUP UTILITY主PCIPnP引導安全芯片組退出設置配置CPU。←→ 選擇屏幕↑↓ 選擇“Enter Go to Sub Screen F1 General Help F10 Save and Exit ESC Exit WARNING”（輸入轉到子屏幕F1一般幫助F10保存并退出ESC退出警告）：在以下部分中設置錯誤的值可能會導致系統故障。¾CPU配置¾IDE配置¾軟盤配置¾SuperIO配置¾遠程訪問配置¾USB配置

The Advanced BIOS Setup menu allows the user to configure some CPU settings, the IDE bus, SCSI devices, other external devices and internal drives. Select the Advanced tab from the ezPORT setup screen to enter the Advanced BIOS Setup screen. You can select the items in the left frame of the screen, such as SuperIO Configuration, to go to the sub menu for that item. You can display an Advanced BIOS Setup option by highlighting it using the keys. A sample of the Advanced BIOS Setup screen is shown below. NOTE: Changes in this screen can cause the system to malfunction. If problems are noted after changes have been made, reboot the system and access the BIOS. From the Exit menu select ‘Load Failsafe Defaults’ and reboot the system. If the system failure prevents access to the BIOS screens, refer to Chapter One for instructions on clearing the CMOS. 002.53 (C) Copyright 1985-2002, American Megatrends, Inc. NOTE: Options shown may not be available on your system. BIOS SETUP UTILITY Main Advanced PCIPnP Boot Security Chipset Exit Advanced Settings Configure CPU. ←→ Select Screen ↑↓ Select Item Enter Go to Sub Screen F1 General Help F10 Save and Exit ESC Exit WARNING: Setting wrong values in below sections may cause system to malfunction. ¾ CPU Configuration ¾ IDE Configuration ¾ Floppy Configuration ¾ SuperIO Configuration ¾ Remote Access Configuration ¾ USB Configuration